Sculling Sleeves & Buttons
The easily distinguishable Croker pink was first introduced in 1992 when Kaye Croker decided she could make masculine rowers use pink. What started as a threat has become the hallmark of Croker genuineness and quality. Our Croker pink sleeves, teamed with our yellow buttons, make a Croker Oar impossible to miss!
All Croker rowing oars are fitted with a copolymer interlocking injection moulded sleeve and button system.
Introducing
the Quick Adjustment Sculling Button &
MK4 Sleeve
​
Firmer lockup while maintaining smoothness of the Croker Sleeve.
​
No tools needed for adjustment!
​
Available for Arrow Sculling & Standard Sculling Shafts
Requires new MK4 Rowing Sleeve.
MK4 Sculling Sleeve
Specially designed for the new adjustment button, held together with plastic interlocking clips. It is more stable with a larger surface area making the square and feather position more positive.
Arrow Sculling Shaft
Fits Shaft: S39, S40
USD $40.00 pair
​
Standard Shaft
Fits Shaft: S2, S3, S4
USD $40.00 pair
MK3 Asymmetric
The MK3 is a major upgrade to the MK1 symmetrical sleeve and is held together with plastic interlocking clips. This double ended sleeve performs better because it only has two flat surfaces.
The asymmetric design reduces the distance between the shaft and the swivel face. It is more stable square or feathered and positive in its movement, squaring and feathering. This asymmetric design is not recommended for use with the Magik or Martinoli swivels as these swivels produce excessive wear on the sleeves.
Fits: S2, S3, S4, S7 and S39/S40 Arrow shafts
Complete per pair USD $30.00
MK1Symmetrical
The MK1 sculling sleeve comes in two parts, the sleeve body and the clip (back). The inboard measurements are calibrated on the back of the clip.
The geometry of the sculling sleeve, if combined with rowlocks that have a 95 degree inside corner, provides excellent stability at the catch. The sculling clips can be replaced as required without removing the sleeve. The Mark1 sleeves are now only installed on S6 Trainer sculling oars. Prior to 2005, S2 and S3 oars sold in the USA were also outfitted with a version of the Mark1, now only available by special request.
Mark 1/S6: S5 & S6 Shafts
MK1 / S6 Complete per pair USD $30.00
Buttons Quick Adjustment
MK4 Sculling
Quick Adjustment Button
Fits MK4 sleeve
Arrow and Standard Shafts
MK4 Quick Adjustable Button
(only fits MK4 sleeve)
Fits shafts:
Arrow S39, S40
S2, S3, S4
USD $40.00 pair
MK3 Sculling
Quick Adjustment Button
Fits MK3 sleeve
Arrow and Standard Shafts
MK3 Quick Adjustable Button
(only fits MK3 sleeve)
Fits shaft:
Arrow S39, S40,
S2, S3, S4
USD $40.00 pair
Buttons Standard
MK3 Sculling Button
Fits MK3 sleeve
Arrow and Standard Shafts
MK3 Button
(only fits MK3 sleeve)
Fits shafts:
Arrow S39, S40
S2, S3, S4
USD $20.00 pair
MK1 Sculling Button
Fits MK1 sleeve
Standard Shafts
MK1 Button
(only fits MK1 sleeve)
Fits shaft:
S2, S3, S4
USD $20.00 pair